How to identify it
- Model identifier
- iMac13,1
- Model number
- A1418
- Released
- October 2012
- Processor
- Intel Core i5 2.7/2.9 GHz, Core i7 3.1 GHz (Ivy Bridge)
- Storage
- Hard drive (HDD 1 TB 5400 rpm standard; 1 TB Fusion Drive (1 TB HDD + 128 GB flash) option on 2.9 GHz)
- Drive connection
- SATA 2.5in HDD; flash connector fitted only on units ordered with Fusion
- Security chip
- None
The model number (A followed by four digits) is printed on the underside or back of the Mac. On a Mac that still starts, the model identifier is in System Information.
Recovery methods for this Mac
- Logical recoverySoftware-level recovery from a working deviceYes
Deleted files, reformatted or erased disks and damaged HFS+ or APFS volumes. We work from a sector-by-sector image, never the original drive.
- Physical recoveryRepairing failed hardware to read the dataYes
Failed heads, motor or platter damage are handled in our clean room with matched donor parts. PCB and firmware faults are repaired on the bench.
- Chip-on recoveryReading the NAND in place, through the original controllerNot needed
Not needed. The drive comes out, so a dead logic board doesn't stop recovery.
- Chip-off NAND recoveryRemoving the memory chips and reading them directlyNot needed
Doesn't apply. A hard drive stores data on magnetic platters, not NAND chips.
About this model
- Display is bonded to the chassis with adhesive and must be cut free (new adhesive strips needed) to reach the drive.
Estimate the cost for your iMac
Answer three questions to see our standard price range. Inspection is free and you get a fixed quote before any work starts.
Logical data recovery
Standard turnaround is 5–7 working days.